Trans-Port Choral Risers

Our Trans-Port unit eliminates the need to setup multi-level risers. The Trans-Port is a unitized three-level carpeted choral riser that conveniently allows set-up in seconds.

• Unit is outfitted with built-in wheels making it easy to transport from room to room and load into a vehicle.
• Built with 14-gauge legs, our unit is strong, safe, and durable.
• The Trans-Port is built with aluminum frames making it much lighter than a steel frame unit, but is just as strong.
• Multiple units can be connected, using our straight or tapered units, to create a variety of configurations.
• Comes in Grey frame and Grey carpet surface.

Dimensions
Model	Open Dimensions
72" Straight Unit	72"W x 54"D x 24"H
72-60" Tapered Unit	72"-60" x 54"D x 24"H

General
Risers shall consist of three 18" wide levels, 8", 16" and 24" high that are permanently joined with hinge mechanisms to enable the unit to open and close in a unified fashion. Each unit shall be equipped with wheels for easy transportation when folded and to allow for easy positioning after the unit has been set up.

Frame
Riser levels shall be supported by a 3" deep, double walled, extruded anodized aluminum frame that overlaps the top of each level to protect the carpet edge. Two screws and lock nuts per bracket shall be used to secure hinge to frame. Frames must be joined with welded 5/16" bolt hinge.

Platform
Riser platforms shall be constructed of 3/4" thick plywood, surfaced with polyolefin carpet.

Foldability
Risers shall be easily foldable and shall be easy to transport from place to place by an adult of average strength.

Ganging
Risers shall easily attach to each other without lifting unit by connecting ganging cord onto latch underneath the adjoining riser.

Optional Guardrails
Guardrails shall be constructed of black epoxy powdercoated tubular steel and shall be equipped with clamp-on attachments for easy installation. Guardrail must attach to unit using bolt.

5-year Warranty

NATIONAL PUBLIC SEATING CORPORATION offers the original user a warranty against all manufacturing defects in material and workmanship. If defective, NPSC will, at its option, repair or replace the defective product. This warranty does not apply to damage resulting from misuse, abuse, or neglect. Authorization for returns and/or repairs is required by contacting your dealer. This warranty gives you specific rights, and you may also have other rights which vary from state to state.

Orders are accepted under the express agreement that under no circumstances will seller be liable for any incidental or consequential damages, or for any other loss, damage or expense of any kind, including loss of profits, arising in connection with the order or with the use or inability to use seller's product furnished under the order. Seller's maximum responsibility shall not exceed and buyer's remedy is limited to either (i) repair or replacement of the defective part or product, or at seller's option, (ii) return of the product and refund of the purchase price. Such remedy shall be the buyer's entire and exclusive remedy.