Mobile Cafeteria Stool Tables

• Unit locks at midway position for easy under table cleaning.
• 4 inch caster wheels automatically lift off the ground when table is opened
• Tabletops consist of high-pressure laminate bonded to a 3/4" thick premium grade 7 layer plywood.
• Tabletop sides are protected with our unique protectedge coating that surrounds the edges of table tops to prevent trapping of food or bacteria.
• Stools are 13" diameter made of High impact ABS plastic and are attached to a 1 1/4" diameter support post.
• High impact plastic stools are durable and reinforced with multiple plastic strengtheners.
• Safety latch secures unit in closed position for safe and moving and storage.
• Non-obstructive entrances allow easy access to each stool.

Dimensions
Model	Folded Dimensions	Open Dimensions	Seats
NPSMTS8PW	59"W x 35"D x 57"H	59"W x 96 1/2"D x 29"H	8
NPSMTS10PW	59"W x 36"D x 73 1/2"H	59"W x 120 3/4"D x 29"H	12
NPSMTS12PW	59"W x 39"D x 79 3/4""H	59"W x 144"D x 29"H	16

General
Folding, mobile cafeteria table with attached stools shall have a top surface measuring 30" wide. The top surface shall be 29" high when opened for use. The top length shall be 12' or 10' or 8'. The table shall have 12 or 8 stools. Leg assemblies shall be chrome plated. All other metal frame components should be epoxy powdercoated.

Entrances
Each stool position shall have its own entrance clear of obstructions when entering the unit to sit down. Stool units having support members running across the entrance area are not acceptable.

Locking
A security lock shall tightly lock the table in the open position and must be capable of operating from both sides of the table. The lock rod shall be 7/16" diameter and chrome plated to resist wear. The table shall also be fitted with a midway position lock to allow units to be secured in a partially folded position during floor maintenance and for easier and faster mobility.

Tabletops
Plywood core with TuffEdge guard. Tabletops shall be surfaced with high pressure laminate bonded to a 3/4" thick AC grade plywood core, sealed underneath with a phenolic backer sheet. Edge of the top shall be sealed with a polyurethane epoxy resin, chemically bound to the edge of the laminate, core and backing sheet.

Table Top Support
Each top shall be supported by two 1 7/8" deep, 14-gauge steel apron. Apron shall contain no holes greater than 1/2" diameter and shall be capped at the ends with riveted plastic protectors. Each top shall be supported in at least two places.

Leg Assemblies
Tubular leg components shall be 1.05" and 1 1/4" diameter, 14-gauge steel tubing. Legs and stool columns shall be constructed of 1 1/4" diameter, 14-gauge steel tubing and shall be braced horizontally to the stool support column on the opposite side of the table to resist bending. Units with stools braced from the floor are not acceptable.

Stools
Stools shall be injection molded with a minimum of 25 oz. of Rubber modified, high impact, polystyrene materials measuring 13" in diameter. Stools shall be reinforced against breakage with a minimum of 12 integrally molded, tapered ribs. Ribs shall extend from the outer parameter of the stool to the mounting hub at the center if the stool. Stools shall be mounted with 5/16" diameter bolts and locking nuts. Spring pins are not acceptable.

Casters
Casters shall be heavy-duty, double ball baring type with a minimum rated load capacity of 275 lbs. each. Casters should have hard rubber non-marking wheels 4" diameter x 1.25" wide.

Safety Requirements
Bench units shall be safety tested and listed by Underwriter's Laboratories, Inc. Bench units must display UL labels with valid UL file number.

When bench unit is opened for use, all casters shall lift off the ground automatically so the table does not roll. Casters that protrude past the end of the bench unit when opened for use, are prohibited to prevent tripping hazard. Stool units shall have no moving parts that can pinch, cut or pierce the operator's hands while the table is being folded up and down.

15-year Warranty

NATIONAL PUBLIC SEATING CORPORATION offers the original user a warranty against all manufacturing defects in material and workmanship. If defective, NPSC will, at its option, repair or replace the defective product. This warranty does not apply to damage resulting from misuse, abuse, or neglect. Authorization for returns and/or repairs is required by contacting your dealer. This warranty gives you specific rights, and you may also have other rights which vary from state to state.

Orders are accepted under the express agreement that under no circumstances will seller be liable for any incidental or consequential damages, or for any other loss, damage or expense of any kind, including loss of profits, arising in connection with the order or with the use or inability to use seller's product furnished under the order. Seller's maximum responsibility shall not exceed and buyer's remedy is limited to either (i) repair or replacement of the defective part or product, or at seller's option, (ii) return of the product and refund of the purchase price. Such remedy shall be the buyer's entire and exclusive remedy.