Hotel Duty Plywood Crescent Table Risers

These are the Original Series Plywood Crescent Risers from Maywood.

Riser Height: 12"

Plywood Tops: Clear faced plywood: 5/8" thick, sanded smooth, without voids and patches, sealed on both sides with protective walnut stain. Rectangular table tops are 3/8" thick; all other table tops are 5/8" thick.

Edging

• Vinyl Flush Edge - Molding is a black flat vinyl “T” edge.
• Crimped Aluminum Edge - Molding is high-pressure crimped to the top.

Understructure:  

• Legs made from 1 1/2" square, 20 gauge steel tubing
• All metal parts are black powder coated
• Chassis is a self-supporting unit welded and riveted throughout and consists of two longitudinal 1 3/4" x 1" x 1/8" rerolled high carbon steel angles
• Two (or three, depending on the model) additional steel cross rails where needed
• A rectangular stretcher piece, 1 1/2" x 4", is welded between the legs near the top to provide maximum strength and rigidity
• Leg assembly secured to the angle iron rails with 1/4" steel rivets
• Each of the four legs is individually braced with a 13 gauge steel elbow, riveted at one end to the leg and at the other to the angle iron rail
• Each pair of elbow braces is joined by a locking bar, 2 3/4" wide, 16 gauge, to insure they move in unison
• An automatic lock insures that the elbow braces lock in the past center position
• Metal caps standard
• Folded thickness: 2 7/8"